The only wire tap detector that will let you check both single and two line phones quickly and easily. It will check your phone lines for on premises series and parallel bugs and wire taps. You can also check your telephone for the most common types of hookswitch bypasses. (A hookswitch bypass is a modification to the telephone instrument that causes the transmitter or receiver in the telephone handset to pick up room sounds and pass them down the phone line even with the phone hung up. This effectively turns the telephone into a room monitor.)
The PGTT46 detects series devices with a resistance of 10 ohms or more. (Most series taps have a resistance of over 100 ohms.) It also detects parallel devices with a resistance of 65 megohms or less. (Most parallel taps are under 30 megohms.) It can also detect certain capacitively coupled taps. Also included is a line monitor that lets you check the wire pairs for the presence of room audio when the phones are hung up. (The presence of room audio on the phone line when the telephones are not being used is a sure sign of bugging.) A line driver is part of the monitor function. The line driver is used to turn on (activate) any voltage operated microphones, such as FET mics, that may be connected to a pair of wires.
Please note that neither PGTT46 is not a "magic box" that is connected permanently to a working phone line. PGTT46 is a test set that lets you check your on-premises wiring and telephones for eavesdropping devices or taps. In order to do this, you must be able to disconnect your inside wiring from the telephone line coming into your home or business. This is done at the interface between the telephone line and inside wiring; usually just by unplugging a cable at the interface box mounted on the side of the building. There is nothing difficult about this, but, of course, you must have access to this interface box.
• Detects series devices with a resistance of 10 ohms or more
• Detects parallel devices with a resistance of 65 megohms or less
• Checks single line phone systems for series and parellel taps
• 9V battery
• Cords, Plugs, Adapters
• Illustrated instruction manual
• 7 inches x 4.6 inches x 2 1/4 inches
Speak with a technician right now for free to insure that you are selecting the right product(s) to satisfy your specific needs.
Call Now: 866-974-4327 or 1-732-625-0500 (Mon-Sat: 8a - 8P ET)